7CT. RAW MIXED PATCHES

These features make application easy and ensure the patches last.

Applying your RAW patches is a simple process you can do at home with a household iron. For the best results, use them on fabrics like cotton or denim and avoid using your iron's steam setting. Proper application ensures a strong bond that will last through wear and washing.

What Are The Steps To Iron On A Patch Correctly?

1. Preparation: Start with a clean, dry, and freshly ironed garment on a hard, flat surface.
2. Positioning: Place the patch where you want it, with the embroidered side facing up.
3. Protection: Cover the patch with a thin cloth or towel to protect the embroidery from direct heat.
4. Pressing: Press the iron firmly down on the covered patch for 30-45 seconds. Do not move the iron back and forth.
5. Flip & Repeat: Turn the garment inside-out and press the back of the patch area for another 20-30 seconds.
6. Cooling: Let the patch and garment cool completely. Once cool, gently test the edges to ensure a secure bond.

Is It Better To Iron On Or Sew On Patches?

Iron-on patches are fantastic for quick, easy application with a clean look. They are the fastest way to customize your gear. For superior durability, especially on high-wear areas or fabrics sensitive to heat, sewing is a better option. For the absolute best of both worlds, iron on your patch first for placement, then add a few reinforcing stitches around the edge.

The best part about having a mixed set is the creative freedom it offers. These patches from RAW are perfect for adding character to a wide range of apparel and accessories.

• Denim Jackets: A classic choice. Place them on the back, chest, or sleeves.
• Backpacks & Tote Bags: Excellent for covering scuffs or just adding personal flair.
• Hats & Beanies: Customize your headwear with a smaller logo patch on the front or side.
• Hoodies & Sweatshirts: Apply to the chest or sleeve for a subtle branded look.

Proper care is essential to keep your iron-on patches looking great and securely attached for a long time. Following a few simple washing and drying rules will prevent peeling and maintain the vibrant colors of the embroidery.

Can You Wash Clothes With Iron-On Patches?

Yes, but with care. For the first 48 hours after application, avoid washing the garment to let the adhesive fully cure. After that, turn the garment inside-out before washing. Use a cold water, gentle cycle setting on your washing machine and avoid using bleach. This minimizes stress on the patch edges.

How Do You Keep Iron-On Patches From Peeling?

The number one rule is to avoid high heat after a patch is applied. Always let your garment hang dry instead of putting it in a hot machine dryer. If you notice an edge or corner starting to lift, you can cover it with a cloth and repress it with an iron for 10-15 seconds to reactivate the adhesive.

A little preparation and post-application care go a long way in ensuring your patch stays put.

What Is The Pre-Application Checklist?

• Choose a heat-safe fabric like cotton or denim.
• Pre-wash and dry the garment without fabric softener.
• Set your iron to a high (cotton) setting with no steam.
• Find a hard, flat, heat-resistant surface to work on.
• Have a pressing cloth (like a thin towel or parchment paper) ready.
• Plan your patch placement before heating the iron.

What If The Patch Edges Lift After Washing?

If an edge lifts, it is usually easy to fix. Lay the garment flat, cover the patch with your pressing cloth, and use your hot iron to press the lifting edge for 10-15 seconds. Hold firmly to ensure the adhesive re-bonds with the fabric. For a permanent fix on a high-stress area, adding a few stitches with a matching thread color is the most reliable solution.

Once you've personalized your gear, check out the rest of our collection for more ways to complete your look.

• Shop the Full Apparel Collection

Pair your patches with a RAW lanyard for an easy everyday accessory.