HONEYBEE HERB BELL SHAPE SHOWERHEAD PERC CYLINDER ASH CATCHER

Understanding the parts of this ash catcher helps you see the value it adds to your setup. We chose each feature to improve how it works and how long it lasts.

These specs create a functional accessory that's easy to use and maintain.

• The 14mm joint is a very common standard.
• Showerhead percs are known for great filtering without making it hard to pull.
• Borosilicate glass makes sure you get a pure taste.

Beyond the basic specs, our design choices directly improve your experience. The showerhead perc and bell shape work together to deliver great performance.

How Does The Showerhead Perc Improve Hits?

The showerhead percolator is the engine of this ash catcher. It's a vertical tube with slits at the bottom. When you pull, smoke is forced through the slits, creating tons of bubbles. This process cools the smoke and filters out ash, giving you a much smoother and cleaner hit that's less harsh.

Why Choose A Bell Shape Design?

The bell shape is for function, not just for looks. The wider base provides better stability when attached to your water pipe, which helps prevent tipping. This shape also holds a good amount of water in a small space, ensuring the perc is fully submerged for the best filtration without making your setup feel top-heavy.

• The showerhead perc cools smoke by forcing it through water.
• The bell shape adds stability with its low center of gravity.

Choosing the right ash catcher is all about the fit. Use this checklist to see if our Bell Shape Showerhead model is right for your water pipe.

1. Check Your Joint Size: Does your piece have a 14mm joint? Our ash catcher has a 14mm male joint, which fits into a 14mm female joint.
2. Confirm Your Joint Gender: Is the joint on your water pipe female ? This is key, as the male joint of the ash catcher fits inside a female joint.
3. Determine the Angle: Is your downstem angled at 45 degrees or sticking straight up at 90 degrees ? Order the matching angle to make sure the ash catcher sits upright.
4. Measure for Clearance: Is there enough space around your joint? The bell shape is wider than a simple tube, so ensure it won't bump into the base of your bong.
5. Consider the Weight: While designed to be stable, adding any accessory adds weight. This is best for medium to large-sized water pipes.
6. Define Your Goal: Is your main goal to keep your piece clean and get smoother hits? If yes, this ash catcher is a perfect choice.

• An ash catcher's angle must match the joint angle of the water pipe.
• Mismatched joint sizes, like 14mm to 18mm, will need an adapter .

Adding this ash catcher to your routine is simple. Follow these steps for a clean and smooth session.

1. Fill with Water: Add a small amount of cold water through the male joint until the showerhead perc slits are just covered.
2. Attach to Your Piece: Gently insert the 14mm male joint of the ash catcher into the 14mm female joint of your water pipe for a snug fit.
3. Pack Your Bowl: Place your bowl into the female joint at the top of the ash catcher.
4. Perform a Test Pull: Take a small, dry pull to check the water level. If it splashes, empty a little water. If it doesn't bubble, add a bit more.
5. Enjoy Your Session: Use your water pipe as you normally would, and notice how the ash stays in the catcher.
6. Clean Regularly: After your session, carefully remove the ash catcher, empty the dirty water, and rinse to prevent buildup.

• The right water level is key for good function without splashback.
• Rinsing it after each use makes deep cleaning much easier.

In the affordable sub-$30 range, you have a few choices. Here's how our Bell Shape Showerhead Perc model compares to other common styles.

This model offers a great balance of filtration and ash-catching in its class.

• Our showerhead perc ash catcher gives you a high level of filtration.
• It is a big functional step up from basic dropdown or dry ash catchers.

Keeping your Bell Shape Ash Catcher clean is key for great performance and taste. It will get dirty faster than your main piece because it traps all the gunk—that's its job! Regular cleaning is quick and easy.

What Is The Best Way To Clean A Glass Ash Catcher?

For a deep clean, use isopropyl alcohol (91% or higher) and coarse salt. First, rinse the ash catcher with hot water to remove loose debris. Then, add coarse salt and enough alcohol to cover the perc. Cover the joints and shake it well for 30-60 seconds. The salt scrubs the inside clean. Pour out the dirty liquid, rinse well with hot water, and let it air dry before using it again.

• Isopropyl alcohol and salt is the go-to method for cleaning glass accessories.
• Rinsing with hot water often can reduce how often you need to deep clean.

This Bell Shape Showerhead Perc Ash Catcher is a fantastic choice for upgrading your setup. If you're looking for other styles or different joint sizes, you can browse our full collection.

• Explore our complete range of Ash Catchers for more options.